Breaking News
 |  | 

Water Treatment

Best Filtered For Water


Which is the best filter for drinking water;

Should I put a filter on my fountain? If so, what should I put in? He needs; Do I Know What I Buy? Do I follow the manufacturer’s instructions? Following the research on the suitability of the water we drink, we are now opening the chapter “Water Filters”, which are placed in domestic tap water. As it turns out, many consumers are convinced to buy filters but they do not know what filter they have bought and for what purpose.

Look here with the advanced technology in our filters

Water does not just quench

Water does not just quench, it has elements that are necessary for the human body, so reverse osmosis systems with some of the filters should be avoided.” Personally, he does not use any extra filters other than his own factory-fitted faucet. “If the consumer unscrews the tap of the filter and often cleans it, then more water will run off the dirt that is a germ,” he explained. From then on, he continues, “If the consumer is convinced by the manufacturer / supplier to buy a filter then he is at his own risk and should follow the instructions faithfully. If the instructions require changing the filter to so many thousands of liters or so, then the consumer has to change it otherwise the result will be worse than what he would have if he did not use any filter at all, “he concludes. a common filter that holds solids is ideal for water supply water which is safe, according to the controls of health services.

What the consumer should know first of all is that there are two general (much more specific) types of filters:

Microbiological filters: Improve the microbiological quality of water. If the water transfers bacteria, the filter holds them and does not allow them to pass through the tap and usually retains some suspended solids that may be present in the water, e.g. rust or dirt. “It is good to have such a filter because it usually retains the free chlorine that comes into the water of the water supply to protect microbiologically the water when it is transported into the pipes. Reasons for water contamination during transport are e.g. breaking a tube, stopping water, etc … On the other hand because we have tanks, a coliform to pass to them can multiply due to the increased temperatures, “the chemist notes, explaining how a microbiological filter with an A protection without excessive cost is good to place.

Chemical filters

“Chemical filters”: they alter the chemical composition of water, ie they remove various chemicals such as calcium, magnesium, chloride, etc. These filters need special attention in their choice. That is, to buy such a filter you must have found that its water has a real problem with elevated salts. “If you buy water from the water supply which already has low salt (within the limits of the water legislation for human consumption N87 (I) / 2001) and adds a reverse osmosis filter (it has membranes that interfere with the flow of water by retaining all the salts) then the result is to completely remove the salts. In such a case the water becomes unsaturated and is not suitable for drinking. If, however, a house away from a water supply selects water from high salt drilling, it can use a reverse osmosis filter, however, with such a setting that it does not completely remove the salts, “he concludes.









Your email address will not be published. Required fields are marked *

Name *

Email *